Single cylinder piston pump, positive displacement, air motor powered, high pressure, with drop tube intake mounted on adjustably calibrated steel post stand with can top retainer, attached to two-wheeled can transport dolly.

Cylinders - 1
Fluid Output – gallons per hour - 10.5
Fluid Output – gallons per minute - 0.18 gpm
Pump cycles per minute - 60
Pump gallons per cycle - 0.001471
Maximum fluid output pressure - 3000 psi
Wetted parts description - zinc-plated carbon steel, stainless steel, carbon steel, polyurethane, polyethylene, Teflon, Delrin, chrome plating, leather, rubber, V-Max UHMWPE, aluminum, tungsten carbide; * Delrin and Teflon are registered trademarks of DuPont Co.

Height - 36 inches
Length - 12 inches
Width - 14 inches
Weight - 54 lbs Crate size: 24” x 24” x 40”

Air volume requirement - 20 cpm (will vary per operating pressures and durations)
Inlet max air pressure - 150 psi

DOCUMENTS

Air Motor Schematic Diagram
Air Motor Parts List
Air Motor Manual

Displacement Pump Repair Manual
Displacement Pump Schematic Diagram
Falcon Pump Operations Manual

NOTICE: All written and visual data contained in this document reflect the latest product information available at the time of publication. Publisher reserves the right to make changes at any time without notice.

Click on images for larger view.

Return to Grout Pumps

STATEMENT
Strata Tech believes that the information herein is an accurate description of the general properties and characteristics of the product(s), but the user is responsible for obtaining current information because the body of knowledge on these subjects is constantly enlarged. Information herein is subject to change without notice. Field conditions also vary widely, so users must undertake sufficient verification and testing of the product or process herein to determine performance, safety, usefulness, and suitability for their own particular use.
Strata Tech warrants only that the product will meet Strata Techs then-current specification. NO WARRANTY OF SUITABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS MADE. Users should not assume that all safety requirements for their particular application(s) have been indicated herein and that other or additional actions and precautions are not necessary. Users are responsible for always reading and understanding the Material Safety Data Sheet, the product technical literature, and the product label before using any product or process mentioned herein and for following the instructions contained therein.

Copyright C 1990 by Strata Tech, Inc. All rights reserved. No part of this publication may be reproduced or disseminated in any form, by any means, or stored in any electronic format without prior written permission from Strata Tech except as allowed under the U.S. Copyright Act, 1976. Printed in USA. REV 980421.
Will Jaques

Return to Top